Submission
Labs are to be submitted as hardcopy to the professor per due dates included on the course schedule on the main course page.
NOTE: Please bring printed hard copies of each lab to work from and for the instructor to sign.
Lab Manual
The lab manual is available below and is to be printed out by each student.
References
Below are reference materials intended to be used with each lab.
Lab 1: Diagrams & Logic
Textbook Chapter 2 & Appendix (Rockis & Mazor, 2014. Electrical Motor Controls for Integrated Systems 5th ed.)
Textbook Chapter 5 (Rockis & Mazor, 2014. Electrical Motor Controls for Integrated Systems 5th ed.)
Lab 2: Relays & Logic
Textbook Chapter 5 (Rockis & Mazor, 2014. Electrical Motor Controls for Integrated Systems 5th ed.)
Textbook Chapters 8 (Rockis & Mazor, 2014. Electrical Motor Controls for Integrated Systems 5th ed.)
Lab 3: Sources & Loads
Textbook Chapters 9-11, 13-15, 18 (Rockis & Mazor, 2014. Electrical Motor Controls for Integrated Systems 5th ed.)
NEC 430 readings and lecture slides
Lab 4: Motor Control
Textbook Chapters 6, 8, 15, 16, 25, & 26 (Rockis & Mazor, 2014. Electrical Motor Controls for Integrated Systems 5th ed.)
Siemens VFD Manual: CU250S Compact Install Instructions
SEW VFD Manual: MOVITRAC® LTP-B Compact Operating Instructions
Lab 5: Programming Control
***Note: to view tutorials, set up a FREE user profile***
Tutorial#1: Configuring RsLinx Serial DF1 RS-232 Driver To Communicate
Tutorial#2: Downloading program to a PLC (NOTE: disregard steps 7 – 9 if using serial comm configuration)
Tutorial#3: Going ONLINE with PLC
Tutorial #4: Basic ON/OFF Control XIC XIO OTE
Tutorial #5: Timers – TON, TOF, And RTO
Tutorial #6: Counters – CTU and CTD
Manual: MicroLogix 1100 PLC (review Ch 1 & Ch 3)
Manual: RSLogix 500/Micro Software (see Ch 2 for software overview & quick start)